Helix carbide rods are a type of tool material that is widely used in various cutting and machining applications due to their exceptional hardness, toughness, and wear resistance. They are made from a mixture of tungsten carbide and cobalt powder, which are compressed and sintered at high temperatur

In mechanical processing, hole processing accounts for about 1/5 of its total processing, and drilling accounts for about 30% of the entire hole processing. I believe that the gold powders working in the drilling line will not be unfamiliar with the understanding of drill bits. When purchasing drill

Editor's note Gear is a widely used spare part in life, whether it is aviation, freighter, automobile, etc., it will be used. However, when the gear is designed and processed, its number of teeth is required. Some people say that if it is less than 17 teeth, it cannot be rotated, and some people say

Complex deep hole machining is becoming more and more challenging. Parts often require additional features such as very small hole finishes, inner chambers, hole diameter variations, contours, grooves, threads, and varying hole orientations. Efficiently obtaining such tight tolerance holes requires

Classification and application of cemented carbide What is cemented carbide? What are its characteristics?1. Definition: cemented carbide is a composite material produced by powder metallurgy and composed of refractory metal compounds (hard phase) and bonding metals (bonding phase). 2. Features: Hig